This revision permits the publication of BS EN to be adopted as a Harmonised Standard under the Constuction Products Directive. BS EN. Hot finished structural hollow sections of non-alloy and fine grain steels -. Part 1: Technical delivery conditions d Copy. Find the most up-to-date version of BS EN at Engineering
|Published (Last):||18 March 2007|
|PDF File Size:||7.45 Mb|
|ePub File Size:||1.2 Mb|
|Price:||Free* [*Free Regsitration Required]|
In this case the values to be achieved shall be agreed between the purchaser and the manufacturer at the time of enquiry and order. In case of dispute, the method used shall be agreed taking into account CR BS EN 1 The requirements for tolerances, dimensions and sectional properties are contained in BS EN Standards are also available from the BSI website at http: Annex ZA of this European Standard ;?
To consider the test unit as conforming after testing the second set, the following conditions shall all be satisfied simultaneously: The NPD option may not be used, however, where the characteristic is subject to a threshold level. Cold cracking is caused by a combination of the following factors: It supersedes BS EN Applies to hollow sections formed hot, with or without subsequent heat treatment, or formed cold with subsequent heat treatment to obtain equivalent metallurgical conditions to those obtained in the hot formed product.
Technical delivery requirements Status: The following performance characteristics are not subject to initial type testing for the following reasons: The test report shall contain the following codes and relevant information in accordance with EN Identification number of the notified body;? Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
NOTE A range of material grades is specified in this standard and the user should select the grade appropriate to the intended use and service conditions.
Hollow section for general applications
This standard consists of the following parts under the general title ‘Hot finished structural hollow sections of non-alloy and fine grain steels’: Test method EN BS EN specifies the technical delivery conditions for hot finished hollow sections of circular, square, rectangular or elliptical forms and applies to hollow sections formed hot, with or without subsequent heat treatment, or formed cold with subsequent heat treatment to obtain equivalent metallurgical conditions to those obtained in the hot formed product.
General rules and rules for buildings ENHot rolled products of structural steels — Part 2: Structural hollow sections of fine grain steels shall conform to the requirements of Annex B. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.
In order to meet the provisions of the EU Construction Products Directive, these requirements need also to be complied with, when and where they apply. Specifies technical delivery conditions for hot finished hollow sections of circular, square, rectangular or elliptical forms.
The 102101- frequency of testing shall be in accordance with Table D. The N-binding elements shall be recorded in the Inspection Document. Those relevant to this part are listed below with appropriate clause references. During the design process itself, a record shall be kept of all checks, their results, and any corrective actions taken.
Arc welding ISO This applies in particular to personnel that needs to initiate actions preventing product non-conformities from occurring, actions in 102100-1 of non-conformities and to identify and register product conformity problems. The scope of this annex is defined by Table ZA. Click to learn more.
BS EN for Hot Finished Structural Hollow Sections
The qualification shall be in accordance with EN or, at least, an equivalent to it. Click here to find out how to access this document. You may find similar items within these categories by selecting from the choices below:. You may experience issues viewing this site in Internet Explorer 9, 10 or This European Standard supersedes EN