INFORMATION FOR. INTERLINE Colour. Gloss Level. Volume Solids. Typical Thickness. Theoretical Coverage. Practical Coverage. Method of Application. PRODUCT DESCRIPTION. A two pack epoxy holding primer. Protection for freshly blasted steel in tank coating products involving Interline g/kg of liquid paint as supplied. EU Solvent Emissions Directive (Council. Directive /13/EC). Interline Epoxy Tank Holding Primer.
|Published (Last):||22 February 2009|
|PDF File Size:||13.73 Mb|
|ePub File Size:||20.23 Mb|
|Price:||Free* [*Free Regsitration Required]|
Interline A two pack epoxy holding primer.
International Paint should be consulted to confirm that the tank coating is suitable for the range of cargoes to be carried. Consult your International Paint representative for specific recommendations. Based on this, products supplied in different territories may not be approved to all of the standards listed above. Allows for more flexible working procedures whilst not detracting from the chemical resistance of the completed coating scheme. In the event welding or flame cutting is performed on metal coated with interlkne product, dust and fumes will be emitted which will require the use of appropriate personal protective equipment and adequate local exhaust ventilation.
Do not exceed pot life limitations. Test performance results were obtained in a controlled laboratory environment and International Paint makes no claim that the exhibited 892 test results, or any other tests, accurately represent results found in all field environments. Multiple coats may be required to achieve specified film thickness. Use International GTA only in exceptional circumstances.
Products Marine Coatings Marine chemicals Marine lubricants. Take precautions to avoid skin and eye contact ie.
Technical and application data herein is for the purpose of establishing a general guideline of the coating application procedures. As application, environmental and design factors can vary significantly, due care should be exercised in the selection, verification of performance and use of the coating.
Application by roller is recommended for small areas only. A two pack epoxy holding primer. Store in dry, shaded conditions away from sources of heat and ignition.
Consult your local International Paint representative for specific recommendations. Unmixed material in closed containers should be maintained in protected storage in accordance with information given in the STORAGE Section of this data sheet.
Once units of paint have been mixed they should not be resealed and it is advised that after prolonged stoppages work recommences with freshly mixed units. Material is supplied in 2 containers as a unit. The history and age of the steel and the method of working can have a significant effect on the paint consumption. Actual safety measures are dependant on application methods and work environment.
The drying times and overcoating intervals may alter due onterline various on-site factors such as tank configuration and ventilation rates. Consult your International Paint representative for the system best suited for the surfaces to be protected.
Do not allow material to remain in hoses, gun or spray equipment. Subject to re-inspection thereafter. Recommended Tip Range 0.
Interline | Litnobiles
Petersburg, Russia, phone: High pressure fresh water wash or fresh water wash, as appropriate, and remove all oil or grease, soluble contaminants and other foreign matter in accordance with SSPC-SP1 solvent cleaning.
Read and follow all precautionary notices on the Material Safety Data Sheet and container labels. These may be interlije to variation depending on factors such as differences in colour and normal manufacturing tolerances. Overcoating information is given for guidance only and is subject to regional variation depending upon local climate and environmental conditions.
Consult your International Paint representative for details. Apply in good weather. Prior to use, obtain, consult and follow the Material Safety Data Sheet for this product concerning health and safety information.
Thoroughly flush all equipment with International GTA Always mix jnterline complete unit in the proportions supplied. Frequency of cleaning will depend upon amount sprayed, temperature, relative humidity and elapsed time, including any delays.
Proper ventilation and protective measures must be provided during application and drying to keep solvent vapour concentrations within safe limits and to protect against toxic or oxygen deficient hazards.
Application by brush is recommended for small areas only. All surfaces to be coated should be clean, dry and free from contamination.
Use in accordance with the standard Worldwide Marine Specifications. VOC values are typical and are provided for guidance purposes only. Marine Coatings Marine chemicals Marine lubricants. DO NOT thin more than allowed by local environmental legislation. Clean all equipment immediately after use with International GTA If you do not fully understand these warnings and instructions or if you can not strictly comply with them, do not use this product. It is good working practice to periodically flush out spray equipment during the course of the interlinee day.