Intercure Primer by International Paint – INTERCURE HS BUFF, VPN: EPA/5/A for only $ Buy online or find out more at Richmond Industrial . Intercure can also be used as a primer for substrates other than blasted steel , e.g. stainless steel, alloys etc. Consult International Protective Coatings for. Product Description. Intercure is an epoxy rich zinc phosphate/micaceous iron oxide primer. Key Features: Rapid cure & recoat capabilities in low.
|Published (Last):||21 July 2012|
|PDF File Size:||4.1 Mb|
|ePub File Size:||7.96 Mb|
|Price:||Free* [*Free Regsitration Required]|
Warning Intercure HS is preferred for use with systems for chemical environments where zinc based materials can be subject to attack in both acidic and alkaline conditions.
Low molecular weight reactive additives, which will form part of the film during intercuure ambient cure conditions, will also effect VOC values determined using EPA Method The content of this website is our best recommendation and is not advice. Systems compatibility Intercure HS will normally be applied to suitably prepared steel, e.
However, if necessary, application over prefabrication blast primers can be performed.
Over-application of Intercure HS will extend both the minimum overcoating periods and handling times, and may 020 detrimental to long term overcoating properties. Surface preparation All surfaces to be coated should be clean, dry and free from contamination. Intercure Safety Advice. Always mix a complete unit in intercire proportions supplied. Work stoppages Do not allow material to remain in hoses, gun or spray equipment. The use of alternative thinners, particularly those containing ketones, can severely inhibit the curing mechanism of the coating.
If the shop primer shows extensive or widely scattered breakdown overall sweep blasting maybe necessary. Be the first to write a review for this product!
Intercure® – International Paint Ltd
To find out more about producing specifications for building projects visit www. The following primers are recommended for Intercure Low trade prices Our best trade prices on everything! Intercure HS is not intended for use as a primer for steelwork which may be subjected to continuous immersion conditions. Absolute measured adhesion of topcoats to aged Intercure HS is less than that intrcure fresh material, however, it is adequate for the specified end use.
International Intercure 200
If oxidation has occurred between blasting and application of Intercure HS the surface should be reblasted to the specified visual standard. As a inteecure for steelwork intended ihtercure use in a wide range of aggressive environments, including offshore, chemical and petrochemical plants, industrial buildings, pulp and paper mills, power plants and bridges. Intercure is not intended for use as a primer for steelwork which may be subjected to immersion conditions.
Over-application should be avoided as thick films will not be as good a substrate for topcoat adhesion after ageing as those at the specified thickness.
Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays. Intercure HS is suitable for application to blast cleaned surfaces which were initially to the above standard but have been allowed to deteriorate under good shop conditions for up to days.
Interzinc 22 mist coat or tie coat may be required. The question has been correctly sent.
International Intercure – Rawlins Paints
It is good working practice to periodically flush out spray equipment during the course of the working day. Additionally, intercute common with all epoxies Intercure HS will chalk on exterior exposure. Press and move to zoom. However, these phenomena are not detrimental to anti-corrosive performance. GTA Do not thin more than allowed by local environmental legislation Mix ratio: Intercure can also be used as a primer for substrates other than blasted steel, e.
These may be subject to variation depending on factors such as differences in color and normal manufacturing tolerances. Formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions.
Intercure HS can also be used as a primer for substrates other than blasted steel, e. As a primer for steelwork intended for use in a wide range of environmental conditions including offshore, chemical and petrochemical plants, industrial buildings, pulp and paper mills, power plants and bridges.